AVS4You.comSupportRulesAbout Us
    ENG English    FRA Français    DEU Deutsch
Posts: 41
Registered: 15.12.2009
01.01.19 13:25:10
Why I can't change h264 Profile from Main to Hight? I tried enable all encoder features and nothing changed. I can change only Level.

Default Level 3.1 also is wrong, when resolution is Full HD, Level 3.1. 4.0 is more suitable.
Selecting bitrate should be limited by this settings or it should be set by automatic.

You can't require knowledge of these technical information from the user.
Attached files:
Developer
Posts: 253
Registered: 08.09.2009
04.01.19 11:54:05
markac:
Why I can't change h264 Profile from Main to Hight? I tried enable all encoder features and nothing changed. I can change only Level.

High Profile is not available. It will appear in the future. We currently recommend the Main Profile.

markac:
Default Level 3.1 also is wrong, when resolution is Full HD, Level 3.1. 4.0 is more suitable.

Default Level for Full HD in our profiles (presets) is 4.0, but 3.1 - for HD.

markac:
Selecting bitrate should be limited by this settings or it should be set by automatic.
You can't require knowledge of these technical information from the user.

Now the Level parameter is used for informative purposes for decoders, without limiting Bitrate in our GUI. In practice, it is not critical. We will try to optimize the configuration process for Level and Bitrate in GUI in the near future.
Online:
Users:  0  
Guests:  372