AVS4You.comSupportRulesAbout Us
    ENG English    FRA Français    DEU Deutsch
Posts: 2
Registered: 18.10.2016
18.10.16 19:05:44
When trying to copy a Blu-Ray disc with Disc Creator 5.2, I get through the first part where the original disc gets copied. Then when I take out the original disc and insert the new BD 25Gig 6X disc, I get "Error 59." I've tried rebooting and doing the whole process about 4 times with the same results.
I used Windows 8.1 with plenty of everything. I was able to create and burn a blu ray using AVS video editor with no problem. I just cant seem to copy a blu-ray.
Thanks for any help!

pj
Attached files:
Nat
Posts: 2364
Registered: 03.07.2008
19.10.16 07:23:12
To: pjcorn

Dear user,

Please follow the recommendations:

1. See whether the DMA mode is enabled for the used drive. See the Help file on how to find out the current DMA mode status.

2. If such a problem appears with the same disc or with the discs from the same lot, you should try and use a different disc for the recording. To assure the compatibility with the different drives, it is recommended to use low-speed discs from known manufacturers.

Inform about the result please.

Kind regards
Posts: 2
Registered: 18.10.2016
19.10.16 16:27:11
Windows 8.1 doesn't have a DMA mode. It's always on. Yes, I've tried different discs. Please remember that I said in my initial post that I can make a Blu-Ray just fine with AVS. I just can't copy a Blu Ray disc without getting that error.
Thanks
Nat
Posts: 2364
Registered: 03.07.2008
20.10.16 08:19:53
To: pjcorn

Dear user,

Thank you for the information.

Please repair AVS files:

1. Close all AVS programs and other running applications.
2. Copy the following link to the address bar of My computer window and press <Enter>:

If you run 32bit PC: %COMMONPROGRAMFILES%\AVSMedia\ActiveX\Repairing.exe
If you run 64bit PC: %COMMONPROGRAMFILES(x86)%\AVSMedia\ActiveX\Repairing.exe

If some of the .dlls are not registered, please make a screenshot of the Repair window showing those files and send it to us.

Thank you for cooperation.

Kind regards
Posts: 1
Registered: 13.07.2019
13.07.19 07:14:49
Yaa pls solve this error as soon as possible
Nat
Posts: 2364
Registered: 03.07.2008
17.07.19 09:41:28
To: Ramirez36

Dear user,

Please repair AVS files:

1. Close all AVS programs and other running applications.
2. Copy the following link to the address bar of My computer window and press <Enter>:

If you run 32bit PC: %COMMONPROGRAMFILES%\AVSMedia\ActiveX\Repairing.exe
If you run 64bit PC: %COMMONPROGRAMFILES(x86)%\AVSMedia\ActiveX\Repairing.exe

If some of the .dlls are not registered, please make a screenshot of the Repair window showing those files and send it to us.

Thank you for cooperation.

Kind regards
Online:
Users:  0  
Guests:  504