AVS4You.comSupportRulesAbout Us
    ENG English    FRA Français    DEU Deutsch
Posts: 2
Registered: 12.10.2009
12.10.09 09:58:41
I need to produce a NTSC version of an existing PAL DVD.... can anyone advise the best way of achieving this, retaining the chapters etc...?
Cheers,
Peter
Administrator
Posts: 1786
Registered: 22.01.2009
13.10.09 03:52:08
To: peter@tatinga.co.uk

You need to import VIDEO_TS.IFO file into AVS Video Converter, choose To DVD and select one of the NTSC profiles. As soon as the video is converted, you will be able to burn the DVD straightaway. However, note that the menu and chapters will be lost this way. You can only set them anew in the program.

Best regards
Posts: 2
Registered: 12.10.2009
13.10.09 04:41:18
Thanks for that, Nadin, but I was rather hoping there was some way of doing it to preserve the menu and chapters. If there isn't it means I'll have to put it into a DVD authoring program and that could be quite fiddly as I will need to extract all the menu and chapter details from the original manually.
Cheers,
Peter
Administrator
Posts: 1786
Registered: 22.01.2009
14.10.09 07:33:28
To: peter@tatinga.co.uk

Most likely, in the next version of AVS Video Converter chapters from a DVD menu will be recognized (shown as markers on the timeline), so you will not need to re-set them from scratch. As for the menu, its recognition is a very complex task and will not be implemented in the near future.

Regards
Posts: 1
Registered: 19.03.2010
19.03.10 20:16:30
Converting PAL DVD to NTSC
Hi
Anyone know if this is possible to do using the AVS software?
Administrator
Posts: 1786
Registered: 22.01.2009
22.03.10 01:13:27
To: winnetou

Using AVS Video Converter you can convert PAL DVD to NTSC.
Please note the posts submitted above.

Regards
Posts: 1
Registered: 13.02.2011
13.02.11 16:55:34
How come when I convert from PAL to NTSC the picture is Jittery.....
Posts: 2396
Registered: 29.01.2012
14.02.11 05:54:24
To: Maxdout38

Do you have this problem just with certain DVD or with several DVD's?
Posts: 54
Registered: 04.12.2008
10.06.11 20:08:03
To: nadin

Dear Nadin, so do we have to convert the DVD film 2 times?
In the first time we get the NTSC DVD, but without the menus.
So, we need to convert this NTSC movie again to build the menu with chapters - using the AVS video converter. Is that correct?
Posts: 2396
Registered: 29.01.2012
13.06.11 03:58:12
To: codonauta

Hello,

Nadin meant that existing DVD menu will be lost, however you can create your own menu even at the first conversion. So you need to convert your DVD only once.

Best regards.
Posts: 54
Registered: 04.12.2008
13.06.11 16:29:16
To: Vlad

Yes, I understand it.
But and related to DVD codes area? The issue PAL x NTSC is not the same than DVD codes areas 1,2,3,4,5,6,7,8
If I have a DVD from Europe, so, probably region 2, to transform it in a DVD region 1 ( of my place, South America ), must I
do the procedure with the AVS video Converter 7.1?
Posts: 2396
Registered: 29.01.2012
16.06.11 08:42:17
To: codonauta

Disc burned with AVS4YOU software are region free, so it will be readable in any region.

By the way, we have recentely release AVS Video Converter version 8.0, it is avaliable on our website.

Regards/
Posts: 54
Registered: 04.12.2008
17.06.11 21:50:34
To: Vlad

OK, I will download the new one. It is good to know about the new release.
Thanks, best regards.
Online:
Users:  0  
Guests:  146